Home > News > Content
Bathroom Cabinet Selection Wrong Moldy Cracking Very Troublesome
- Jul 28, 2017 -

Bathroom Cabinet Installation Considerations

1 depth proportional to strength

The water splashed on the body is probably the most uncomfortable thing people feel. In general, the depth of the sink is proportional to the strength of the faucet that is installed on it, that is, the deep pool can be installed with a strong faucet. Do not install a large faucet on the shallow pool at the bottom, or the water will spill over when used. In addition, the bottom of the basin should have enough radian, not too flat.

2 installation height should be reasonable whether it is a stand-alone or desktop wash basin, the pool surface or mesa height is usually 0.8 meters, because too low pool will make people back pain. However, the height of the specific table should also be considered in order to achieve the desired use effect.

3 pool edge should be slightly higher than the table

Wash basin edge of the pool should be slightly higher than the table, but with the table must be smooth, the purpose is to splash to the table on the water to wipe back into the pool without hindrance, and facilitate the cleaning of the table. The table itself must choose the surface smooth material, the edge and the two corners must be smooth, lest bump. The smoothness of the wash basin itself is also very important, the high finish of the pool surface so that the water debris is not easy to attach to the surface, relative to reduce the need to scrub the number of times.